Ultrasound Transducer Simulation Page
BioSono provides a cyberspace (www.biosono.com) where researchers, engineers, and students can find useful reference and educational materials, conduct acoustic simulation, post questions on design and development, and get answers. The online KLM based transducer acoustic stack simulation, which is currently free, can help you choose piezoelectric, matching and backing material, and a tuning electrical network. The output from the model includes electrical transmit impedance, acoustic receive impedance, and the impulse or pulse-echo response. The ultrasound beam profile simulation provides the calculated transmitted ultrasound pressure field under certain excitation for a given transducer aperture in a number of different geometrical configurations, including circular elements (flat and concave piston), rectangular elements, linear arrays, convex arrays, and 2D arrays. The simulation is based on Field II, which is a free program that utilizes the spatial impulse response method, and has been validated by many researchers for accuracy. In addition to the web based acoustic simulation, we also provide pulse-echo system, transducers, and customized design and develop services.
ultrasound beam simulation longitudinal view
ultrasound beam simulation cross view

You are welcome to the ultrasound discussion area. Your questions will be answered if they fall into the following categories:
  • Piezo-electrical material
  • Basic acoustic or ultrasound
  • Ultrasound imaging theory
  • Ultrasound transducer simulation, design and fabrication
  • Ultrasound beamforming architecture, algorithm, and related electronics.
  • Ultrasound transceiver, analog front-end.
  • Ultrasound imaging display algorithm

Back to main forum-New Topic-Reply
AuthorPost
JustinJiLast replied to at December 20, 2015, 10:12 am

Is there any body research about the composite material based on single crystal?
I am interesting in this, including the manufacture procedure and it's applicaiton etc.
welcome to communicate with me. justin_ji@126.com

JustinJiLast replied to at May 15, 2008, 3:59 am

Y.In fact, I am a probe engineer and use the composite to make into many different types of ultrasound transducer, which including NDT probe (angle beam, immersion, phase array...) and medical probe(linear array, phase array).
Do you have the experienece of design composite?


PJLast replied to at May 5, 2008, 12:22 pm

The composite is very popular this days due to its high kt, and lower acoustic impedanc.
Could you tell more about your application?